COMPLETE BROILER SYSTEMS

PROVEN & DEPENDABLE

Storage • Feed • Watering • Ventilation • Housing

Our Bulk Feed Tanks perfectly illustrate the attention to detail that quality demands. Every stage of the forming process, from corrugation to die-cut shaping to precision finishing, is controlled at our own facilities to assure
quality is maintained.

Bin Roof
Roof panels are precision manufactured using die-form tooling to provide consistent quality. Both 30° and 40°

roofs feature reinforcing ribs at each roof seam for added strength and rigidity.

Unloader
Designed to fit below 16” (406mm) plastic and 22”
(559mm) metal boots, Cumberland standard unloader
are available for 2.2” (55mm), 3” (75mm), 3.5 (90mm)
and 5” (125mm) Flex Flo™ or 4” and 6” rigid auger
systems. All Cumberland unloaders have a ultra high
impact, polypropylene slide-gate above the auger to
meter feed or serve as a complete shut off. Also, a
convenient inspection/ clean out plate, located on the
side, is easily removed with two wing nuts. Additionally
they feature a heavy duty ball bearing for increased
service life and reduced maintenance.

LID
• Available for 30º and 40º roof profiles
• Rugged and durable LLDPE plastic construction
• Factory assembled for easy installation
• Simplified clamp-band installation of lid assembly to
peak ring
• Reinforce rubber bumper provides additional
protection to peak ring
• Internal magnet adds additional force to keep lid
closed
• Clamp-band design allows installation in 360º
orientation

Single Unloader shown with optional swing away bottom for 100% clean out

Heavy Duty Boots
Cumberland’s 16” (40.6cm) parabolic boot (available in straight boot, 30° and straight twin boots) is made from the very latest ultra high impact polypropylene for greater flexibility and durability. Most of our competitors use the older ABS plastic, which is stiff, brittle and prone to fracture, cracking and tear-out, especially where it’s attached to steel. ABS is not able to be UV stabilized, unlike our polypropelene resin blend which contains special UV light inhibitors, further enhancing it’s durability.

Twin Boot
Straight Drop
Boot
30 ° Drop Boot

Sure-Flo
An affordable and simple way to prevent
bridging and promote even feed flow in
feed bins!
• Reduces feed bridging
• First in, first out feed flow
• Reduces feed separation
• Easy to install

With Sure-Flo
Without Sure-Flo

The Sure-Flo support bracket easily bolts to the
hopper collar of new or existing feed bins and
is quick and simple to install.

Sure-Flo directs feed down the hopper the bin rather than
down the center creating a first in, first out feed flow. The
gentle movement of the heavy walled molded cone enhances
flow as feed passes over it.

Bin Load Cell
• Each load cell has 10000LBS capacity
• Lightning protection at each load cell
• Accuracy over the entire linear range
• Accuracy and durability to withstand lightning, wind and
temperature fluctuations

Target Load Cell Support
Target Load Cell

Reliable Construction

Precision Manufactured Roof
Panels, provide consistent
quality and feature reinforced
ribs at each seam for added
strength and rigidity on both the
30º and 40º bin roof options.

High Strength Ladders with
roll-formed sides are available
in 2’ and 9’ sections for quick
assembly. Ladder rungs are
engineered to eliminate rung
spin and are dimpled for a
better grip.

Fully galvanized, Roll Formed
6-Bend Legs, Cross Ties and
Two Piece Leg Anchor Sections
provide greater strength,
stability, support and load
transfer. Tank hoppers are
available in 45º, 60º and 67º
slopes. Die-formed with a down
turned sealed edge provides a
weather-tight fit and smooth
flow of material.

Ladder cages are available
for all Bulk Feed Tank sizes.
Cages are completely
galvanized for maximum life
and bolt directly to the
prepunched side wall
ladders. The cage bottom Bell
Section allows ample
maneuvering space while
ascending or descending.

Bulk Feed Tanks Models:

Flex-Flo™ System
Cumberland offers five Flex-Flo™ models with capacities ranging from 15lbs. to 220lbs./minute (6.8kg to 99.8kg/min) whether it’s ground feed, crumble feed, mash, high
moisture corn, shelled corn or pellets, Cumberland has the equipment to handle it. For corn with up to 27% moisture and other hard to flow materials, Cumberland also offers a Flex-Flo™ High Roughage system which incorporates a special combination of a 3” (75mm) auger in a 3-1/2 (90mm) tube to reduce plugging.

Special Blend
Polyvinyl chloride (PVC) tubing is extruded and formed in our own facility, to exacting standards and under our own quality control. Blended PVC allows us to formulate the optimum compound for UV stabilization, strength and wear resistance.

Quality Auger
Cumberland augers are coiled in-house from high tensile steel. The wire used is flattened prior to hardening, providing for a more consistent, high quality product.

Around the Bend
For moving feed up in the air and around corners. Flex-Flo™ tubing is available in specially formed elbows with increased wall thickness on the inside of the elbow for strength and wear resistance.

Flex-Flo™ Models

Extension Hopper
For applications requiring distance greater than the standard length of any given system, extension hoppers are available that can expand the delivery range to practically any distance and can provide access at 90° from the main line.

Direct-Drive Unit & Straight Transition
Power Direct-Drive Unit
Belt-Drive Unit

Flow Hammer
Feed bridging has become a common event in the poultry industry as feed rations change due to fluctuating input costs and the use of alternative feed stuffs to lower cost and gain feed efficiency. The “Flow Hammer” is a reliable and affordable solution that easily adapts to most existing feed bins. This product aids in the prevention of out of feed events in all phases of poultry production.
• Helps minimize feed bridging events to keep feed flowing consistently to animals
• Low maintenance and simple installation (no field modifications to the tank required)
• Control unit has both timer and sensor controlled modes:
– The timed mode uses an “on” time and a “cycle” time to control the flow Hammer when the
feed system is running.
– The sensor mode uses a sensing device to detect a feed flow issues and activates the Flow
Hammer. Once the event has ended, the Flow Hammer shuts off
• Control unit can be remotely mounted or tank mounted with optional leg bracket

Over 500lbs/sec

Comparing to high frequency vibration devices,
which are effective in promoting feed flow, but
results in loosened hardware and metal fatigue
potentially resulting in structural failure, our
FLOW HAMMER’s low frequency/ high impact
design promoted feed flow without damaging
your feed bin or voiding its warranty.

PAN FEEDING

Hi-Lo Plus

Hi-Lo Plus is the farm-tested result-proven feeding pan, which carries and maintains all the successful features from years of practice and experience. Putting the birds’ comfort and farmers’ convenience first, the new Hi-Lo Plus is thoughtfully engineered for both farmers’ and birds’ satisfaction. The high-low adjustable feature and swing able design provide birds an ergonomic feeding position throughout the entire life cycle. The unique structure makes assembling the pan easy for every farmer and satisfies GSI’s high quality and performance standard.

Hi-Lo Classic Pan & Hi-Lo VIII Pan

Two-Stage pan performance inside one complete feeder is the idea behind Cumberland’s revolutionary Hi-Lo Pan Feeding System. The Hi-Lo pan feeder represents a unique concept in the poultry industry, using one feeder to take from day-old through adult. The first ten days of a broiler chick is critical. The Hi-Lo pan feeder can start on the house floor, presenting a lip height of 2.1” (5.33cm), the average height of traditional “chick lids”. As the bird grows, the feeding line needs to be raised. The Hi-Lo is able to expand into a 3.5” (8.89cm) deep pan. The higher wall and feed saver lip prevent waste from raking and spill out.

The telescoping drop tube automatically compensates for uneven floor conditions. The drop tube is available in either the standard one piece or optional two pieces design.

360° Action
The combination of drop tube and grill allows movement in 360°, reducing bruising and injury to the birds.

Feed Depth
Control
Feed depth control measures directly from the bottom of the pan, assuring all birds a consistent
and even supply for fresh feed.

Two Stages
Collapsed (2.1”)
and Expanded
(3.5”)

EZ Flood Fan

The EZ Flood Pan is suited for day-old chicks until full grown. The design concept of EZ Pan is to allow maximum flooding feed when the pan is set at the lowest position

M Series (7 & 14 spoke design)

The M Series Pan is suited for day-old chicks until adult. It is made from high quality materials with high corrosion resistance and UV resistance. The wide spokes will reduce bruising and injury to the birds. The higher wall and feed saver lip helps prevent wastage.

My Pan

My pan is a comprehensive feeding pan that is easy to install and operate, designed for day-old chicks till harvest
• Detachable Drop Tube
• 6 Stages Rotating Feed Level
• Flood Window
• Anti Scratch Fin
• Optional Shut off

Non flooding minimum feeding position
When the feeder is winched up above the floor, the flood feed window will shut off and minimize the feed to flow through the saving ring.

Flood feed position
When the feeder is seated on the floor, the feeding window will give maximum flooding feed. The shallow pan is designed with a feed-saving lip that prevents waste and allows day-old chicks to access the feed easily.

i-Plus 3 Control Pan

Cumberland offers a variety of control pans for your feeder
line. Choose from I-PLUS 3, proximity switch, micro, switch
to Cumberland’s exclusive control pan. All control pan
models are durably constructed and assure consistent
feed regulation.

The i-plus 3 control pan feeding system utilizes Infrared technology to detect the level of feed in the control pan for proper and reliable operation. Infrared technology does not require any moving mechanical mechanism or  sensitivity adjustments.

As the i-plus3 Control pan fills, the infrared beams detect the feed levels
When the feed level breaks all three of infrared sensors, the auger will stop automatically
When the feed drops below the infrared sensors, the auger will re-start automatically after 60 seconds delay.

Tubing & Auger
The rib on Cumberland’s lock formed tubing gives added strength to the tube, as well as providing a solid way to hold the pans in place. The auger is manufactured from pre-flattened wire to reduce material stress and provide for a more consistent, high quality
product.

Poultry Boots
Heavy fabricated, galvanized,
single and double outlet boots
are available for end or center
housing feeding applications

Hopper Feed Level Switch
Traditional micro switch hopper level controls are available to regulate feed delivery.

Watering Systems

Cumberland’s experience and engineering continue to bring you a complete watering system loaded with innovation and features that promote large healthy birds and dry floors.

Cumberland Watering Systems deliver superior overall performance, meets the highest global standard.

Watering System

This system features an important innovation: using ball valve sitting on toggle pin. It has a 360 side-to-side toggle action screw in nipple, which makes drinking four times easier than ever before. The upper metering ball precisely control the flow of water through the valve and the high quality snap on drip cup which keeps the litter dry.

Nipple & Drip Cup

• Cumberland uses hardened high grade stainless steel balls for a tighter seal and accurate flow control
• Inner components are contained and will not disassemble during shipping
• Screw in nipple uses all stainless steel components manufactured in USA
• No special wrench required for assembly

Round Pipe System

Twin Lock Nipple Valves

• 4 different styles available to meet all watering needs
• Only 3 moving parts
• Extra long life
• 360° toggle
• Four times easier action
• Quick and easy assembly (no wrench required)
• High precision stainless steel ball and seat
• Lower pin drinking cavity attracts chicks
• Standard Twin Lock connection interchanges with other brands
• The double locking feature compresses and seals the o-ring uniformly around the drinker

Twin Lock Design I Stainless Nipple Valves

Self Sealing Cap

Self sealing cap at clear
sight tube to prevent
water spillage.

Stainless Steel CW-10015
Plastic Nipple CW-P10013

Features :
• Easily triggered with 360º side-action pin
• Stainless steel nipple with flow rate 56-86 ml/min
• Removable top pin
• Plastic nipple with flow rate of 70-72 ml/min

• Bleeds air from high spots
• Offers mid-line sight gauge reading
• Can be installed anywhere

• Extra strong design
• All flexible sight gauge allows easy pressure reading
• Require no valve at end kit to flush

  • Delivers high volume of water at an adjustable
    pressure
  • Heavy-duty Square pipe adaptor
  • available as an accessory for
    square pipe systems.

Water Regulator

Flushing of the Cumberland Watering System requires no extra plumbing and valves. The Cumberland Regulator can be easily removed from the watering line without
interfering with the suspension of the watering line. The heavy-duty housing of the Cumberland Water Regulator design allows higher incoming water pressure and helps
to prevent any leakage where housing is bolted together. Square pipe adaptor kit is available for Square Pipe System.

Convenient Flush
GSI’s unique flush lever is
designed for greater
versatility and ease of
use, no by-pass necessary

Removable End Cap
This regulator can be easily removed from the watering
line without interfering with the suspension of the
watering line. With the unique in-line design, it can be
used as a mid-line regulator by simply removing the end cap.

VENTILATION FANS

Megaflow Galvanized Fans

Lower Cost, Higher Profits
Cumberland ventilation systems are the perfect solution for more efficient, high performance, climate control in poultry production facilities. Our equipment has
been field refined and industry proven to be extremely effective in reducing bird stress caused by overheated or poorly ventilated houses. Even if your building
is well ventilated, inefficient equipment can blow healthy bird profits right out the window. If you’re looking for a better return on your investment, go for Cumberland, your ventilation expert.

Slantwall Fans

Cumberland offers 36” and 50“ galvanized steel
belt drive slantwall fans to maintain optimal environmental conditions efficiently and effectively. All galvanized fans are constructed of heavy gauge, G-90 grade galvanized steel and use high efficiency motor for continuous duty cycles. Galvanized fans propellers are aerodynamically balanced for maximum air flow.

Box Fans

Cumberland offers 36” and 50”“ galvanized steel belt box fans to maintain optimal environmental conditions efficiently and effectively. All galvanized fans are constructed of heavy gauge, G-90 grade galvanized steel and use high efficiency motor for continuous duty cycles. Galvanized fans propellers are aerodynamically balanced for maximum air flow.

51″ & 69″ Euro Fan

Cumberland 51” & 69“ Euro fan are designed for multiple applications and provide excellent air circulation.
• Stainless steel fan blade for excellent corrosion resistance
• V-belt plastic safety protection cover
• Plastic venturi for better corrosion ressistant and easy to clean for optimal hygiene
• Robust and strong internal X-support structure
• Materials resistant against aggressive climates
• Galvanized shutter with Centrifugal Shutter opening system
• Fully concealed and maintenance free bearing

Cone Fans

Optional discharge cones can boost fan output by
as much as 10-15%, greatly increasing efficiency.
Made from all galvanized steel, cones are
available in easy to ship and assemble four-piece
segments for 36”, 50” & 52” models.

Galvanized Fan Performance Values
Euro Fan Performance Values

Megaflow External Damper Fans

Lower Cost, Higher Profits
The Mega Flow External Damper Fan (Mega Flow ED) follows the footsteps of its top of the line Mega Flow predecessors, boasting the industry’s highest performance
in a galvanized fan. The External Damper line has been completely re-engineered upgraded from the ground up to insure optimum levels of both quality as well as
performance. Increasing air flow during operation and providing an unsurpassed complete seal when closed.
Our innovative AddAire butterfly style shutter system comes in standard on all Mega flow ED models. Due to the fact that minimal dust and debris is collected
by the AddAire Shutter, the efficiency and performance of the unit will remain at their optimum levels for the life of the fan.
• Doors remain fully opened under extreme static pressure due to the patented AddAire wings
• Magnetic shutter panel right eliminates movement of shutter when not in use and creates a complete seal
• Super efficiency totally enclosed air over energy efficient motors
• Four piece galvanized cone for ease of installation
• Available with good label cog v-belt with automatic belt tensioner or powertwist link belt
• Pillow block bearings

Light Trap

Features :
• High light reduction
• PVC extrusion profile protects against sunlight and high temperatures
• Resistance to corrosion and deterioration
• Easy installation and maintenance

Fan Shutters

Available in a variety of size and materials, we have a shutter to fit your particular
requirements it low light, low maintenance or low cost. The true airfoil design of our shutter blades make them streamline the exhaust air flow with very little performance loss. Simple to install and built to last a lifetime. Cumberland shutters can provide an easy and affordable means of controlling incoming
light and building climate.

Cumberland PVC shutters come in white or black color, which requires very low maintenance and easy to clean. The black shutters are used to reduce lighting applications. Aluminium shutters are also available for great durability in any environment. All shutters are rustproofing and practically maintenance free.

Butterfly galvanized fan performance values
Mega Flow External Damper Fans

AddAire is a feature that allows the butterfly style doors to be fully opened and remain fully opened under extreme
levels of static pressure.

ATTIC VENTS & VENT DOOR SYSTEMS

Easy Intall Attic Vents

Cumberland’s Attic Vent ACI Series is precision engineered to extract solar heat from the attic space so it can be used as a valuable heat source. This unique and innovative design is cost effective, durable and easy to insyall

Incorporating all of the same benefits of the ACI-2500 and ACI-4000
Series, Cumberland’s PACI-2500 Series vents are pressure actuated
and operated by constant force of static pressure controlled springs

The Attic Vent System is designed to be retrofit friendly in most drop ceiling poultry houses.

Benefits of Cumberland Attic Vent:
• Drier litter
• Lower ammonia concentration levels
• Better environment for the bird

PVC Plastic Frame

Galvanized Frame

Specifications :

Have You Ever Considered Using Attic Heat as Green Solar Energy for Brooding?

Operation
Vents are operated with a linear actuator or curtain machine and are controlled by your ventilation controller.

House Conditions
Significant benefits to Cumberland’s attic vents are drier litter and lower ammonia concentration levels, thus providing a better in house environment for the birds.

Retroit Friendly
The Attic Vent System is designed to be retrofit friendly in most drop ceiling poultry houses.

Unique Door Design
Exceptional air mixing due to the curved door
profile which provides proper air velocity directing
warm air from the attic into the house.

 


Fuel Savings

Mixing warn air from the attic with house air during
minimum ventilation reduces fuel consumption as
compared to using cold air through sidewall inlets.
Fuel savings can vary depending on management,
Retrofit Friendly house construction and climate

Sidewall Vent Doors

Cumberland’s vent doors are used in poultry applications where transitional ventilation is required. Vent doors comes with galvanized or plastic which are easy to install. These doors are maintenance free and will provide optimum circulation for many years.

Plastic curved door directs fresh air into the house along the ceiling toward the peak for gentle air
mixing without downdrafts on the birds and is ideal for wider poultry houses.

Specifications:

EDGE CONTROLLER

“The Next Generation Controls for IoT Smart farming”

EDGE® is a single platform that is versatile and intuitive allowing it to handle all control applications. The unique design makes EDGE the only controller on the market that can be configured to match your operation’s specific requirements. It is also flexible enough to be adapted to new construction or existing system upgrades. Throughout your animals’ growth stages, you and EDGE are in control, managing and monitoring ventilation, cooling, heating, lighting, feeding and watering systems.

EDGE Key Features:

Three levels of protection, including triple
redundancy and built-in backup mode,
which we make it the safest, most
reliable controller in the industry.

Fully dim able lighting, which works with any lighting technology and controls lighting from low-end output to 100%.

LED temperature probes, patent-pending
technology that simplifies installation
and eliminates the hassle of having to
individually identify the location of each
probe.

The ability to train employees on one system
that will work the same anywhere in the
world.

Online remote access via GSI Edge.com,
enabling farmers to manage and administer multiple sites and houses
from the comfort of their home, house
or other off-site location.

Control multiple barns from a single controller using one interface. Historically, each room would require a separate controller. EDGE reduces management complexity and offers you considerable cost savings by eliminating
the need to have a separate controller for each individual house.

Navigation is easy with the large, 15”
color touchscreen. Everything is right in
front of you for quick, eash navigation.
The buttons are large enough to be
touched even when wearing gloves.
Color-coded notifications give you
real-time status of your entire operation.
Site-wide conditions can also be
monitored from the touchscreen.

Should anything go wrong, the built-in self-diagnostics make troubleshooting
easy. Before you go flipping through a manual or calling tech support,
self-diagnostics can identify a number of issues. The system can tell you when
a sensor is disconnected or incorrectly wired, if a piece of equipment is
drawing too much or too little current, or if internet connectivity is down. It will
pinpoint exactly where the problem is and what you need to do to fix it.

Navigation is easy with the large, 15”
color touchscreen. Everything is right in
front of you for quick, eash navigation.
The buttons are large enough to be
touched even when wearing gloves.
Color-coded notifications give you
real-time status of your entire operation.
Site-wide conditions can also be
monitored from the touchscreen.

Should anything go wrong, the built-in self-diagnostics make troubleshooting
easy. Before you go flipping through a manual or calling tech support,
self-diagnostics can identify a number of issues. The system can tell you when
a sensor is disconnected or incorrectly wired, if a piece of equipment is
drawing too much or too little current, or if internet connectivity is down. It will
pinpoint exactly where the problem is and what you need to do to fix it.

The built-in Configuration Wizard is designed to guide you through the initial set-up by prompting you with questions about each of the specific applications that have been installed. Simply input the fans, inlets, temperature probes, lights and other equipment you have, where they are located and the production type (broiler, breeder, layer, pullet, turkey). Based on this information, EDGE will automatically configure run settings to operate at the optimal conditions.

CONTROLLING SYSTEM

TC4-4SD – 4 Stage Controller

• Four on/off climate controller for fan or heater
• Up to two heater outputs
• Minimum ventilation on/off timer

• Up to four fan outputs
• Back up for TC5
• Automatic temperature reduction

TC4-8SD 8 on/off Stage Controller

Alert Alarm III

• 3 digit display with pilot light indication status
• Up to four independent temperature probe inputs
• Parameter protection (Lock Mode)
• Can be powered with 115/230V AC (50&60Hz)
   or 12V DC

• Minimum ventilation cycle
• Temperature curve
• Computer compatible
• Over voltage protection

• Detects high limit and low limit set point temperatures. If any of these do not meet the requirements, it will trigger the alarm signal
• It can be equipped with 2 temperature sensors and 2 auxiliary inputs from other controllers
• It has built in backup battery that can last up to 2 hours
• Has its own backup siren
• Power supply: 120V AC or 240V AC 50/60 Hz
• Temperature range: 0°C – 55°C
• Outputs: 1 @ 12V DC and 1 AMP inputs
• 2 temperature probes or TC4-4SD board to work as slave

TC5-8SDA – 8 Stage Controller

• Eight on/off climate controls for fans or heater
• Up to eight fan outputs
• Up to two heat outputs
• Up to one cooling output
• Minimum ventilation on/off timer
• Automatic temperature reduction
• Optional: humidity sensor
• Alarm equipped

Bird Scale

Help you reduce mortality rate and reach your desired target. The attractive platform encourages birds to hop onto the scale. The more weight hit each day, the more accurate the house average weight will be. This bird hanging scale kit includes the bird platform and the LCT-1 load cell.

Features:
• Easy to use
• Push-button access to information:
– Average and number of weight
– Standard deviation, uniformity and daily gain
• Weigh your birds throughout the day
• Featherweight can have up to 4 platforms – 2 in each
house. Each platform has an independent reading. Any
platform can be assigned to house 1 or house 2
• Maximum weight of 50kg
• Trade quality Load Cell
• Load cell is located above the platform away from the litter
• Litter and manure build-up do not influence weighing
accuracy
• No electrical wires under the platform

Electronic Controller Expert LA

• Ventilation based on static pressure and temperature
• 2 timed curtain output
• Up to 16 relay output
• Feeder, heater runtime and water monitoring are saved in memory for up to 75 days
• Upload and download chip to easily transfer all the settings (up to 15 different programs)
• 2 air inlets, 2 natural curtain outputs and 2 tunnel outputs
• Energy saver features
• Seamless ventilation step between stages

• PC programmable (optional)
• Minimum ventilation curve strategy and status LED
• Stage 1 fan ramping feature
• Up to 8 inside and 2 outside temperature probe
• 4 heating stage with Hi/Low for up to 75 days
• Light program
• Two 0-10 volts outputs
• 1 cooling stage with programmable cycle timer and relative humidity (RH) override feature when the maximum RH set point is reached
• Clean mode can be activated for empty rooms
• Alarm monitoring
• 3 controller programs that can be charged manually by age and by outside temperature

• Copy and paste feature within control
• Memory chip
• Multiple password protected user levels or optional no passwords
• Sensor calibration
• Misting, age and mortality
• Longer histories (timed and dated)
– Room temperature 60 days
– Inside probe temperature 10 days
– Outside temperature 75 days
– Humidity 75 days
– Heater run time 75 days
– Feeder run time 75 days
– Daily water consumption 75 days

Environmental Electrical Control Panel

Wall Mount Control System

This control systems range from:
• Ventilation control system • Lighting control system
• Feeding control system • Winching control system

Complete Unit
Optional large cabinet for whole house control panel

•Evolution secondary sensing systems
•Lighting distribution control systems
•Feeding distribution control systems
•Ventilation control systems
•Base/plinth, complete 100mm high
•TC5 – 8SDA
•Lifting eye bolts
•Divide mounting plate

Relay panel manual motor starters for control systems

This relay panel manual motor starters provide protection against:
• Overload
• Short circuit
• Phase failure
• Under voltage
Fuseless protection saves cost, space and provides for quick reaction under short circuit conditions,
switching the motor off within 3ms. It is therefore an easy to handle, cost effective protection solution.

AGRI ALERT ALARM SYSTEM

Agri-Alert™ 800EZE

Graphical LCD screen
• View information quickly & clearly
• Intuitive screen design
• Easy navigation through menus
• Monitor up to 8 zones
• Acknowledge alarms by phone
• Call in from off site for zone temperature and system status report

Wireless Option

Go wireless with RS-485 modules. This module can be programmed as a receiver or transmitter with a range of up to 6,500 feet*. This wireless module is typically used in combination with a main controller (AA128 Touch, or AA9600). A secondary wireless RS-485 transmitter can be utilized to relay information from remote RS-485 modules to the wireless RS-485 (Base). This allows a variety of configuration options to accommodate your particular needs.

Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Typical Site For An AA128 System

Wireless system allows establishing communication between up to 16 remote links per Wireless RS-485 (Base).

Agri-Alert™ 128 Touch

• 7-inch color touch screen allows all zones to be seen at once
• Internet connectivity provides remote access, eliminating your need to go to the barn
• Email and SMS notifications
• Modular architecture allows you to design a system that’s the right size for your operation
• 128 zones let you monitor a large site with a single system
• Phone dialer provides dependable delivery of alarm notification
• Built-in security makes sure only authorized users can adjust the system
• Fully compatible AA9600 replacement

Agri-Alert™ Specification

Peace Of Mind

Agri-Alert is a complete alarm system for monitoring
temperature, power, feed and watering system,
burglary, bio security and more. The Agri-Alert alarm
system constantly monitors your operation and
quickly notifies you upon detection of common site
problems or failures.

FLOOR SYSTEMS

Built for Durability and Strength
Create Warm, Dry and Comfortable Environment

Cumberland is the pioneer in plastic poultry slats. Cumberland Poultry Flooring is made from high-impact, virgin polypropylene
plastic designed to replace wood or wire slats in poultry housing.

Performance

Our slatted floor reduces foot pad related diseases and breast blisters, which are caused by wooden slats. Plastic Slats has a longer lifespan.

Rot-Proof/Non-Porous

  • Made from high impact polypropylene plastic material for durability and easy cleaning
  • Corrosion free and does not hide contaminants or harbour bacterial growth
  • Available with (or without) UV protection
Original Cumberland Slats Contain:
Interlock Design
Models
Comfort Model
Eco Model

Interlock Design

  • Our slatted floor reduces foot pad related diseases and breast blisters, which are caused by wooden slats. Plastic Slats has a longer lifespan.

No Sharp Edges

  • 100% consistence dimensions
  • No sharp edges or corners

Strength

  • Strong enough to support the weight of 120kg (265lbs)
  • 100% virgin plastic construction without break

Specifications

HEATING SYSTEMS

Super Saver Heater

The Super-Saver XL heating line is a direct fired heaters that offers Universal Mount
model which includes variations for both inside suspension hanging and outside
mounting.
The inside mount model is a gas circulating heater that is dependable and rugged
construction, ideal for closed houses and suitable for all ages and classes of poultry.

The inside mount model is a gas circulating heater ideal for confinement environment

The outside mount model is a 
forced air heater complete with
all relevant installation hardware.

Outside mount is applicable with the outside mounting kit. The outside mount
models are forced air heaters that come complete with all relevant brackets and
accessories for installation. Its superior combustion is provided by clean, fresh
outdoor air and ensures healthy and safe heating for your poultry needs. All models
are available with options for natural gas or liquid propane.

Super-Saver XL Specifications

• Direct spark models available in 225,000 BTU
• High temp aluminized steel burn chamber
• Side swing door for easy access and maintenance
• Diagnostic lights for troubleshooting ease
• Standard adjustable “Y” heat deflector
• 1/3 HP totally enclosed thermally protected motor with sealed bearings
• Standard “1/2” gas cock installed as gas valve
• Back-up safety sail switch
• High limit safety switch (manual reset)
• On/off toggle switch
• Service-Saver enclosed control box
• 30% gas saving vs conventional brooder

The “Service – Saver” enclosed electronic control unit is sealed from
debris such as dust and moisture and is accessible through a side
swinging door making the unit easily field serviceable.

A side swinging door design gives easy access to internal components
like the “Super-Saver” control unit and blower motor, making it one of
the easiest to service heaters on the market.

The Electronic DSI Ignition is standard on all Super-Saver heater models. The heating chamber is made of high temp aluminized steel for superior rust protection. The cast iron burner is enamel dipped to eliminate dust adhesion and rust. The surrounding air intake increases combustion and heat change efficiency.

Specifications

PuraFire Heater

With one of the lowest carbon monoxide outputs in the industry (CO emissions of 5 parts per million), Cumberland PuraFire
Heaters are able to produce 225,000 BTUH Per hour. Each heater is LP or nature gas compatible and can be mounted inside
or outside any house. These heaters are constructed of tough, rust-resistant galvanized steel for longevity and durability.

Bottom-draw intake of PuraFire promotes a better control of the air flow into and throughout the entire unit and provides a more
efficient mix of air and gas. Cool air channeled along the inside casing, creates a buffer that makes the exterior casing safe to
touch. This air pattern results in a unique bent flame design, which greatly increases the flame’s surface area and heat chamber efficiency.

•Consistent, clean burning source of warmth with near 100% fuel efficiency.
•Thermostat operated.
•Intelligent trouble-shooting safety features.
•In case of flame failure, automatic fan shut down stops drafts & gas control lockout prevents gas from escaping.
•30% Gas saving vs conventional brooder.

•Bottom-draw for better air flow control.
•“Bent flame” design greatly increases flame surface area and heat chamber efficiency.
•Exterior surface is safe to touch.
•Motor assembly, blower, gas valve, control panel and other components are protected from moisture, dirt and dust for longer lifespan
•Swinging doors on each side allow access to all working parts.
•Even heat distribution.

EVAPORATE COOLING SYSTEMS

Open Top Cooling System

GSI evaporative utilize the natural cooling effect of evaporation
to combat seasonal dips in production caused by heat stress.
Cumberland offers the Open Top System Komfort Kooler that
has been an industry favorite for many years.

Key  Features:

Open Top Design

Made of high quality aluminum, this system will give years of dependable operation under the harshest conditions. The Open Top design allows you to see the water jets and easily check water pressure. It also offers access to the spray bar for cleaning. Pre-punched and heavy duty stainless steel components help simplify installation.

Water Troughs

GSI’s pre-formed square trough serves as a 3 gallon per lineal foot (37.4
liters per meter) water reservoirs. Constructed with corrosion proof,
ultra-violet stabilized PVC components, the trough allows unevaporated
water to be recirculated back to the holding tank. A perforated tray snaps
to the trough to hold pads firmly in place. Injection molded end caps and
couplers speed up installation

Water Jet Pump

• All jet pump kits will be factory assembled for easy field installation
• Our new motor is 1Hp 3Ph – 50/60Hz continuous duty motor

Closed Top Cooling System

GSI’s RCS Gen 2 is a combination of simplified and effective evaporative
cooling system. It was developed after years of field study and test, ideal
for areas with hot and dry climate. RCS Gen 2
is a reliable climate control solution, requiring minimum installation and
crafted for simple supervision and maintenance.

GSI only chooses cellulose pads with top quality, made of special cellulose
material that provides a large surface area for high cooling capacity.
Chemical impregnation protects the pads from damages influenced by
outdoor weather.

Key Features:

Closed Top Design

Easy, convenient and flexible opening
during cleaning and servicing

Practical clip – retainers
allow a simple and quick
replacement of the pads,
saving time and labour

Top profile with perforated pipe and
deflector for an even distribution on
water along the pads

Easy installation and pipe
cleaning.

Design of Float Valve is to assure the
compact design of integrated trough
and tank

Bigger Spray Pipe design,
better spray effect

Simplified system with huge water
capacity allows easy installation
and maximum cooling effect with
minimum hassle. 3.96 gallon per
linear foot (49.2 litterss per meter)

CURTAIN MACHINES

Protect the health of your investment with a properly controlled curtain system.
Cumberland’s curtain machines deliver powerful performance and reliable operation
with durable components to withstand a rigorous environment.

PowerTrak Linear Drive and Systems

The superior quality and design of the PowerTrak has produced maximum
performance and efficiency. This model is a second generation of super
strength power pulley systems introduces by Cumberland. It has been
completely upgraded with service in mind and boasts many performance and
durability enhancing features while maintaining the strong points of its popular
predecessors, Power Curtain and Power Vent.

PowerTrak Optional Chain and Sprocket

Depend on the superior quality and design of Cumberland power systems for
maximum performance and efficiency. A proven standard in vent applications was set
with the introduction of the optional Chain and Sprocket PowerTrack which minimizes
alignment problems and cable breakage in vent applications.

• Upper and lower auxiliary contacts for enhanced Evolution features
• 15% increase in load block support surface for greater life
• Convenient hinged springlock door that is easily removed
• Channel lock “trak-drive” system captures load block
• Built in head bracket with needle bearing pulleys
• Easy adjust springcam limit switch system
• Modular construction for ease of service
• Greater protection from the elements
• 5,000 pound capacity

Emergency Curtain Drop Curt-O-Matic II & III

• Simple 3-wire hookup.
• Available in 240 volt models.
• 5 years product defect warranty
• Curtain chain kit.
• Optional: drop delay from 1 to 10 minutes

• Optional: Curt-O-Matic III can be hooked up to your alarm system’s electronic audible, to signal alarm if arm on system should drop.
• Easy Installation.

Gear Up to Powerful Performance

Protect the health of your investment with a properly controlled curtain system. AP’s curtain machines deliver powerful performance
and reliable operation with durable components to withstand a rigorous environment.

Curtain Controller

AP’s Curtain Controller is a screw driven automated curtain machine
with a heavy duty 15, 30 or 60 RPM motor. Multi-directional, frame
mounted, header pulleys are standard.

Polyethylene pulley covers provide additional weather protection.

The Curtain Controller utilizes a threaded
block and drive screw directly coupled
to a direct drive gear motor.

A plastic water resistant junction box is accesible from the outside of the curtain controller.

Isolated primary and secondary limit
switches allow for backup protection.

Solid construction and rust resistant materials make the sprocket controller a reliable workhorse year after year.

The drive block assembly features a removable nylon insert in a heavy-duty cast iron drive block simplifying cable/chain installation and ease of
maintenance. This design also decreases friction and provides wear characteristics superior to conventional brass drive blocks.
UHMW polyethylene guide wheels ensure smooth travel, proper alignment and stability.

Curtain Machine Specifications

Curtain Controller Dimensions

PREFABRICATED STEEL HOUSING

Our energy efficient buildings can double net payback to growers when compared to other conventional buildings.

The 100% steel construction structures are definitely state-of-the-art of live production buildings. No plastic ceilings or wood walls. The structure’s negative pressure ventilation is unmatched with its
durable operating design features. Winter weather heat loss is minimized, optional, bi-flow selectable heat exchanger baffle system. When compared to other buildings on the market, our structures’
attention to detail in building design, use of premium materials, day-to-day operating efficiency and its anticipated 35 year useful life, no greater value can be found anywhere. We are confident that
once you have had opportunity to learn more about our buildings, you’ll agree that structures is the industry’s choice in building design and production.

Features & Benefits:
• Excellent FCR and uniform grrowth
• Fully airtight ocnstruction
• Fiberglass wool insulation with R12 to R29 insulation value to save energy cost
• GSI Quality assurance – each construction material is inspected & tested thoroughly for accuracy
• Professionally engineered single storey, double storey & elevated slat flooring’s buildings
• Code Acceptance: Steel framing is backed by national building codes
• Single span structure from 40ft (12m) up to 80ft (24m) width & wider
• Made of High Tensile Structural Steel with heavy Zinc Coating for structure’s rigidity & longevity
• Flexible: Steel can be designed for longer spans that create more open floor plans & fewer load-bearing walls
• Safety: The strength of steel offers greater protection to you & your family during inclement weather.

• Excellent FCR and uniform grrowth
• Fully airtight ocnstruction
• Fiberglass wool insulation with R12 to R29 insulation value to save energy cost
• GSI Quality assurance – each construction material is inspected & tested thoroughly for accuracy
• Professionally engineered single storey, double storey & elevated slat flooring’s buildings
• Code Acceptance: Steel framing is backed by national building codes
• Single span structure from 40ft (12m) up to 80ft (24m) width & wider
• Made of High Tensile Structural Steel with heavy Zinc Coating for structure’s rigidity & longevity
• Flexible: Steel can be designed for longer spans that create more open floor plans & fewer load-bearing walls
• Safety: The strength of steel offers greater protection to you & your family during inclement weather.